Get the fastest floor removal services
Get the fastest floor removal services
May 26, 2019
Dumpster Rental Working With Contractors
Foundations Of Working With Contractors
June 1, 2019
Show all



Need a dumpster rental near you Hire a dumpster rental , call us +1 833 800 8482 or Dumpster rental near me


Several reasons could trigger the thought of removing your tile floor. Perhaps it cracked when you were moving in your furniture piece; it is worn out and has lost its aesthetics, or you think it’s too old and you need something new. Whatever be may be the reason, all you should be thinking is the best way to remove a tile floor. Of course, you don’t want to get other things spoilt or get injured during the process.
Here, are five easy steps to remove tile flooring. But before we get to that, there are a few essential things you need to keep in mind before you get started.
The first thing need to consider is COST;
Your budget is crucial in whatever you want to do. Before engaging in a tile floor removal, you need to find how much it will cost you. However, the cost will depend on some factors such as;

  • Whether you will be going for a hire a professional or you’ll rather subscribe to a DIY tile removal.
  • The size of the room
  • The amount of stuff that needs to be removed or uninstalled from the space, though it partially affects cost.
    Again, the cleanup. Depending on the volume of your project, you may wish to clear it up yourself or hire dumpster services to take care of the tile chunks.

If you choose to do it yourself, then you may have to be concerned about the cost of tools used and the tile disposal.
There is no doubt that the floor tile removal is time-consuming and physically strenuous though it may be easy and straightforward to do

The next thing to consider is the tools for removing tile flooring.
Tools needed to remove tiles range from the hand to the power tools with each job requiring a different tool assortment.
Let’s have a look at a list of tools that are often employing in removing tile flooring thus;

  • Scraper
  • Chisel
  • Long-handled floor scraper
  • Pry bar
  • Hammer
  • Shovel and buckets
  • Painter’s tape
  • Tarps and plastic wrap
  • Screwdriver
  • Shop-Vac

Another crucial point to consider is SAFETY.

Safety first! Don’t fail to protect yourself as your safety is as important as the outcome of the work you are about to do. You need to get the right gear to keep yourself from getting injured during the floor tile removal process.
As you know, broken tiles are extraordinarily sharp and inflict a cut injury to your skin. Hence, here are a few safety tips;

  • Wear long-sleeved shirts and pants
  • Wear gloves and safety goggles throughout the process including the cleanup phase
  • Always put on a safety mask. Tile removal generates a lot of dust that could irritate your respiratory tract.

Note: In the case of asbestos tile, you should not do it yourself. You may be at risk of developing asbestosis (an injury to the lungs due to long-term exposure to significant concentrations of asbestos particles). It is recommended that you leave asbestos removal to professionals.

Now, let’s get to the five steps for removing a tile floor.

#1 Prepare the area

The first thing is to get the rooms ready for work. This is the first step that will help set you up for success while ensuring that you do not damage your property.
Let’s look at a few things you need to do to get the area prepared for work:

  • Remove those free standing items: get that coffee table or umbrella holder out of the room. You should also see this as an opportunity to discard those items that are no longer in use.
  • Remove any baseboard trim: You need to be careful when removing those baseboard trim on the wall as you may need to reinstall them when you’re done with the tile removal.
  • Sea the vents: tile removal process generates a lot of dust. So, to prevent those vents from getting clogged, you need to seal them off using painter’s tape or plastic wrap before you commence work.
  • Cover the fixed furniture: you can use a tarp to cover those built-in shelving to avoid getting covered with dust.

#2 create a starting point

Look for a spot on the floor, where the tile is cracked or a corner of the room or doorway. The starting point allows you to pull a tile much easier while you get on with the entire room.
Once you’ve identified your starting point;

  • Break those tiles in the spot using your hammer and chisel
  • Remove and place the broken tiles in a bucket
  • Ensure that there is no damage underneath the floor
  • Pull up a tile that isn’t easily removed using a pry bar

#3 Continue with the old tile removal process

Here, you do the bulk of the work. Once you’ve removed enough tile to allow you to engage the air hammer or the long-handled floor scraper, you can now start.
While some tiles may come up easier others may be difficult.
Here are some tips for you.

  • Use shovel to scoop up bigger chunks of ties and applying
  • Avoid too much force as it could result in damage to the floor or injury
  • Consider switching back to a hammer and chisel as you get closer to the tiles near cabinets or the wall
  • Patience is key! So, you need to take your time to get the job done

#4 inspect the underlayment

When you’re done with the floor tile removal, the next thing is to examine what’s underneath the old tiles. If you’re going to reuse the existing underlayment or remove tile from a wood or concrete floor, it is essential to know how to remove floor tile adhesives properly.
Here are some quick tips;

  • Cover the adhesive patches with a citrus-based adhesive remover
  • Allow to stand for the recommended period, then work up the loosen material using a scraper
  • You might need a hammer and chisel if your tile was placed with thinset or tile mortar
  • Discard removed adhesive into a bucket.
  • Continue the process until all the adhesives are removed.
  • Remove the underlayment if it is torn up or water damaged and replace before installing a new floor.

#5 Clean up the mess

Fill your bucket with the old tile, and underlayment chunk and discard where appropriate. You might have to consider a dumpster rental for tile disposal if your project was larger. You don’t have to wait for your next bulk trash pickup day.
You can clean up the small debris and dust with the help of a shop-Vac.
When you’ve completed these steps, the next thing is to decide how you’re going to replace your old tile floor. It’s up to you now!

Right now the best dumpster company in the United States “Need A Dumpster” is locally owned. Our company “ Need A Dumpster “ provide a free estimate in terms of determining suitable dumpster size according to your weight needs more accurately based on provided information. We provide all kind of dumpsters to accommodate all your cleanup needs. Our goal is to provide affordable dumpster rentals with simple pricing and terms. If you have any questions related to the dumpster or any other confusion just feel free to contact at  or call at +1 833 800 8482 for further details. Our experience team will be available with just one quick call. You can visit at our nearest center as well.

Leave a Reply

Your email address will not be published. Required fields are marked *